SPECIFICATIONS:
Maximum Swing ................. 27.95"
Maximum Bar Capacity ........... 2.71"
Maximum Machining Length ....... 60.51"
Maximum Swing Under Turret ..... 20.47"
X-Axis Tool Stroke ............. 25.39"
Z-Axis Tool Stroke ............. 63.46"
Y-Axis Tool Stroke ............. 8.26"
Spindle Nose ................... A2-8"
Spindle Bore.................... 3.14"
Spindle "C" Axis/Minimum Indexing Requirement 0.001 Degrees
Turret Type 2-Position with 80-Position ATC
Turret Tool Shank .............. 1" X 1"
Boring Bar Shank Diameter ...... 2"
Chuck Spingle .................. 40 HP Speed Range 2-2200 RPM
Turret Spindle ................. 15 HP 18-3000 RPM
Tool Limits:
Length from Gauge Line ......... 18.11"
Diameter (Next Pocket Used) .... 4.01"
Maximum Tool Weight ............ 44 lbs
Diameter (Next Pocket Empty) ... 6.30"
Maximum Length from Gauge Line . 18.11"
Maximum Weight of Work Piece ... 2,650 lbs
Rotary Tool Machining Capacity:
Face Mill Diameter ............. 4"
End Mill Diameter .............. 1.57"
Drill Diameter ................. 1.57"
Tap ............................ 1-1/8" 7UNC
Rapid Traverse Rates:
X-Axis ......................... 470 IPM
Y-Axis ......................... 394 IPM
Z-Axis ......................... 590 IPM
C-Axis ......................... 15 RPM
Jog Feed Rate for X, Y, and Z Axis 0.04 - 78-74 IPM
Automatic Tool Change System:
Tool Shank Rotary:
Rotary Tool CAT50
Turning Tool CDI TYPE
Floor Space Requirements........ 260" x 121" x 113.5" H
Weight (approximate) ........... 28,000 lbs
EQUIPPED WITH:
24" 4-Jaw Chuck
Program Controlled tailstock, 56.30" Stroke with MT5 Center
80 Pocket Automatic Tool Changer
Coolant through Spindle
Coolant through Spindle of Milling Head
Automatic Tool Eye Check with Tool Wear Control Software
Chip Conveyor
Mazatrol T-Plus Machine Control
C-Axis Minimum Rotation Increment - .001 DEGREES
Job Hoist at Machine - 2 TONS
Coolant Tank Capacity - 84.5 Gallons
Run Hours.............5000
Cutting Hours.........2000
Auto Cutting Hours....1500
**See attached Warranty, Terms, Machine Use, and Safety.
**These Specifications are subject to verification upon inspection.