|
SPECIFICATIONS:
Spindle Diameter.......................5"
Built in Rotary Table Size.............55.11" x 62.99"
Rotary Table Degree of Index...........0.0001 (Full "B" axis)
Table Capacity.........................17,637 Lbs (8,000 Kg)
X Axis (Cross) Travel..................108.2"
Y Axis (Vertical) Travel...............64.9"
Z Axis (Spindle) Travel................36.2
W Axis (Saddle) Travel.................47.2
Spindle Taper..........................50
Spindle Speeds, Three Gear Ranges:
I......0 - 28 RPM Variable
II.....0 - 140 RPM Variable
III....0 - 1131 RPM Variable
Main Motor Drive.......................30 HP, 60 CY, 3 PH, 460 V
Required Floor Space
Front to Back.....................255"
Left to Right.....................295"
Height............................168"
EQUIPPED WITH:
Fanuc 16iM control (retrofitted in 1995)
New 30 HP Spindle Drive
5 Axis CNC (B, W, X, Y & Z)
High pressure coolant through tool and flood coolant
Built in outriggers
Manual pulse generator
Red cap Fanuc servos and drives
Henning stainless steel way covers for X & W axes
RS232 communications port
Siemens step down transformer (Primary 10 KVA)
Total weight is appox 80,000 lbs.
Machine is dissassembled. Section dimension are:
W x L x H
72" x 234" x 48"
66" x 164" x 32"
38" x 102" x 18"
48" x 48" x 24"
36" x 48" x 45"
34" x 96" x 86"
64" x 24" x 72"
47" x 41" x 24"
34" x 36" x 25"
70" x 166" x 60"
60" x 90" x 21"
32" x 100" x 25"
56" x 125" x 55"
42" x 148" x 33"
*See attached Warranty, Terms, Machine Use and Safety.
**These specifications are subject to verification upon inspection.