|
STANDARD EQUIPMENT & FEATURES:
*American Made
*Double self-centering vise assures burr-free cuts
*Miter capabilities 135 Degrees, 90 Degrees left and 45 Degrees right
* Miter locking devise stops at 45 Degrees left, straight 90 Degrees &
Degrees right
* Double reduction gear box. Both gears are hardened and ground.
* Worm wheel of top quality bronze
* Slotting and longitude cutting
* Material length stop 30"
* One HSS Blade 12-1/2" diameter (315mm)
* Two cutting speeds
* 10 gallon coolant tank with pump
* One gallon coolant
* One blade wrench
* Completely assembled ready for operation
* Warranty: One year parts
MAXIMUM CAPACITIES:
Tubing90 Degree45 Degree
____________________________________________________________________________
ROUND4 7/8"4 3/8"
SQUARE4 3/8" x 3 3/8"4" x 4"
RECTANGLE5 1/2" x 4"4" x 4"
_____________________________________________________________________________
Solid90 Degree45 Degree
_____________________________________________________________________________
ROUND2"1 3/4"
SQUARE2" X 2"1 3/4" X 1 3/4"
______________________________________________________________________________
Manual Saw
Manual Clamp for Material Vise
Operator Control Trigger Switch
SPECIFICATIONS:
LT (Low Turns) designed for solid mild steel, solid stainless steel & thick
wall pipe
LT 22/44 RPM Motor Rate: Low RPM 1 HP-High RPM 2 HP
LT Variable Speed Drive 12 82 RPM Motor Rate: Low RPM 1 HP-High RPM 2 HP
HT (High Turns) designed for thin wall tube and non-ferrous material
HT 44/88 RPM Motor Rate: Low RPM 2 HP-High RPM 2.7HP
HT Variable Speed Drive 24 to 208 RPM Motor Rate: Low RPM 2HP-High RPM 2.7HP
* Factory wired, Specify 230PH, 460 3PH or 575 Volt 3 PH 60 Hz
* Maximum Diameter Blade 14" (350mm)
* Arbor Bore 1 9/16" (40mm)
* Width 21 7/8"
* Depth 17 1/2"
* Height not incl. feed handle 56 1/4"
* Height floor to vise 37 7/16"
* Shipping Weight 675 lbs.
**See attached Warranty, Terms, Machine Use & Safety.
**These specifications are subject to verification upon inspection.